User's Manual Part 6

;f:~i1~~;};;

~:i"";~~i;\:~.~:~;ji;;1

;;:;~Jrl~~~,~~;

i~;:ir;{'~i;!'c:Ji:::~:~;

.c.

Talkman@ Open Operator's Guide

3. The battery is charged and ready for use when the indicator

light on the battery charger turns green. If the red battery

light is on and solid, it is being charged, but is not yet fully

charged. A flashing red LED means that the battery is not

ready to be charged (for example, battery is too cold or too

hot or the other battery is being charged and this one is

waiting its turn).

,'7;;

!'",

Note

This battery charger will only work with approved batteries

and power supplies. Please check with your s~

administrator.

Installing Battery in the Talkman terminal.

To install a Talkman battery, follow these steps:

1. Make sure that the battery has been charged before placing it

in the Talkman terminal If a drained battery is inserted, you

will not be able to collect data.

2. Align the notch on the side of the battery with the notches

inside the battery compartment (see Fig. 5-2).

..,

'~,

,"'

}

""'

,-"

~~if#,;