User's Manual Part 6

Talkman@ Open Operator's Guide
The battery is charged by connecting it to the battery charger. Do
the following to charge the battery:
Figure 5-1, Charging the Battery
;BATTERY PACK
J!
~
~
1. Plug the battery charger into the power supply and the
power supply into a known good electrical outlet. The power
light on the battery charger will go on.
2. Place the battery into an unused receptacle on the battery
charger (see FIg. 5-1). The battery is inserted properly when
the battery contacts are positioned securely against the
corresponding number of contacts in the battery charger. At
this point, a red light on the cradle should go on to indicate
that the battery is being charged or waiting to be charged. If
no light turns on, contact your system administrator.
""' ~~\i#ji,,;:
37