User's Manual Part 5

Talkman@ Open Operator's Guide
background noise sample does not improve the recognition, you may
wish to retrain the word or words you are having trouble with (see
the "Retraining a Word" section in this chapter).
When you press the red background nojse sample button, .the
Talkman terminal says:
c
Pleas e keep ~ietfor: a £ew seconds
.
Then the Talkman tenninal asks you to say the words, "0," "1," "2,"
and "3."
Once you have repeated these words, the Talkman terminal adjusts
the settings for background noise, and says the prompt where you
left off. You can then resume data collection.
You can control how loud the Talkman terminal speaks by using
either the Gray Plus/Minus button ..~ or by using the voice
control, "Talkman, Volume."
Gray Plus/Minus Buttons
Each time you press a gray plus/minus button --, the
Talkman terminal says "louder" or "softer" in a louder or softer
voice. You can resume data collection by simply answering the
prompt you are at.
Talkman, Volume* .
Say "Talkman, Volume", followed by:
increases volume
decreases volume
ends volume adjustment
louder*
softer*
continue*
~~
31