User's Manual Part 4

Talkman@ Open Operator's Guide
Talkman Status Light remains red for an extended period of
time.
.
Contact your system administrator if any of these problems occur.
The Talkman terminal must be trained to recognize the voice of
every person who plans on using it. It does this by asking you to
repeat words so it can learn how you speak them. You can use a
display screen that is provided by your system administrator to view
the words during training.
The key to enrollment training is for the Ta1kman terminal to learn
how you speak normally. This means you should not speak louder,
softer, or over-enunciate your words.
Remember:
The Talkman terminal is learning how you talk in
day-to-day situations.
Note
This Operator's Guide assumes that rl1e system
administrator has sent operaring software, and a task to rl1e
TaJkman terminal. The operator who is training rl1e
TaJkman temrirull must be rl1e active operator. Refer to
TemriruIl Manager On-line Documentation if you need
information on how to do this.
To begin enrollment training, press the yellow play/pause button. If
you are using a display, you will see the following, if not, you will
hear:
"
Please "keep ~iet"f6r"a£ewsec6nds.
" " " "" """" "" " "
The Talkman terminal asks you to repeat the words: "zero," "one,"
"twO," and "three." Speak to the Talkman terminal in your normal
tone of voice.
~
15