User's Manual Part 4

Talkman@ Open Operator's Guide
~- --
battery is charged and connected to the Talkman terminal, then connect
the headset with microphone to the Talkman tem1inaL A task must be
loaded into the Talkman temlinal, and an operator sdected. Once you
press the Yellow pause/play button, the Talkman tem1inal will
automatically take you through the enrollment training process.
Optionally, you can use a display to view the words the Talkman tem1inal
is asking you to speak A display is highly recommended for new
operators as the quality of the training process will affect recognition.
Before starting, make sure that the battery is charged, and that the
battery is connected to the Talkman properly. See Chapter 6,
"Maintaining Talkman Batteries," for help on how to charge a battery
and connect it to the Talkman terminal.
Figure 3-1 Placement of Microphone
Place windscreen covered
microphone at corner of
mouth, out of flow of
breath, 114 .from face.
-.; fY.!.:;",'
"0,, ~i!tii~
13
Put on the headset and adjust the ear pads to a comfortable position.
Place the microphone boom at the comer of your mouth. The
microphone should be a 1/4 inch away from your face, out of the flow
of your breath. (See figure 3-1) The closer the microphone is to your
mouth, the better the quality of training and therefore, the better
recognition will be.