User's Manual Part 3

i;:tf;;:J;-

;!;,;,';;ii,

;!;;.;l;;~ '":'iI;~~~;:,~f;:i;!:fii:

;i'~""

::,":~:;;:

Talkman@ Open Operator's Guide

Figure 2-2} T aikman Connectors

\~~~

Headset Connector

The headset connection is where you plug the headset with

microphone into the Talkman terminal. It has a diagram of a headset

above it as well as a yellow ring around it. The bend relief on the

headset will also be yellow. The connector, called a Lemo, is keyed

to allow you to only insert the headset correctly. See Chapter 3,

"Getting the Talkman Terminal Ready" for information on how to

connect the headset to this connector.

R5-232 Input Device Connector

The RS-232 input device connector has a diagram of a bar code gun

above it and a blue ring around it. The bend relief on the RS-232

device will also be blue. The Lemo connector is keyed to allow you

to only insert the device correctly. See Chapter 5, "RS-232 Input

Devices" for information on how to conrlect an RS-232 device to

this connector.

;~; ~y"