User's Manual Part 3

Talkman@ Open Operator's Guide

Gray operator button

The gray operator button is used with the gray arrow buttons to

select the active operator who will use the Talkman terminal. You

push the gray operator button to start a change operator session, then

use the gray arrow buttons to select the operator you wish to load.

Blue update training button "1

The blue update training button lets you re-train a word the Talkman

temlinal is having difficulty understanding. Use this button to start an

update training session, then use the gray arrow buttons to select the

word you wish to retrain.

Red background noise button .

The red background noise button allows Talkman to adjust to the

type of background noise you are working in. U se this button if the

Talkman terminal is having trouble hearing what you say.

s.,t

,~,

Red/Green Status LED Light

The status light (see Fig. 2-1) provides information indicating the

status of. the Talkman terminal. If this light is solid green, it indicates

that the Talkman terminal is ready to collect data. Additional

information about the status light is available in Chapter 4, "Using

Talkman".

Talkman Connectors

Connectors on d1e end of d1e Talkman terminal allow you to plug in-

.d1e headset, .Printer/PC

.an RS-232 input device, or. Display

.a speaker

(see Fig. 2-2)

~ir