User's Manual Part 3

Talkman@ Open Operator's Guide

Charging the Battery

When you first receive your Ta1kman terminal from the factory,

charge the Ta1kman battery by placing it in the battery charger. It is a

good idea to do this now so it can charge while you get started. ( S ee

Chapter 6, ('Maintaining T a/kman Batteries, 'J for information on how to

charge the battery. To ensure continued peak performance, you

should charge the battery after each shift the Talkman is used.

~!1-

The Cradle

After initial setup, place the Talkman terminal in its cradle. The

Talkman terminal should be placed in the cradle any time it is not

being used to collect data by an operator. This allows the Talkman

terminal to send or receive data with the host computer while idle.

See Chapter 6, "Maintaining Talkman Batteries," for help on how to

place the Talkman terminal in its cradle.

""'

;:"'

;~t,

[::~

The Talkman terminal is used to collect data or perform warehouse

operations, like order picking. You wear the Talkman terminal on a

belt around your waist. You wear a headset with a microphone to

hear the Talkman terminal's instructions or questions, and to talk to

the Talkman terminal.

c.if

~\11