User's Manual

Inserting a Battery into a Talkman T5-Series or T2-Series Device
Make sure the battery to be inserted is fully charged.
1. Hold the Talkman so that the red and yellow ports are facing away from you.
2. Hold the battery with the pins facing away from you and so that the Vocollect logo is on top.
3. Place the battery in at an angle, pins end first.
Figure 28: Properly Inserting a Battery
4. Push the back of the battery into place.
You will hear a click when the battery is in place.
Caution: Do not force the battery into the compartment. You may damage the battery or the device. If the
battery does not snap easily into place, reposition the battery in the compartment and try again.
Make sure the battery is firmly in place and can't be removed without pressing the battery release button.
Inserting a Battery into a Talkman T1 Device
Make sure the battery to be inserted is fully charged.
1. Hold the Talkman with the battery compartment facing you.
2. Hold the battery with the contacts facing to the bottom and away from you.
3. Place the battery in at an angle, non-contact end first.
4. Push the bottom of the battery into place.
You will hear a click when the battery is in place.
Caution: Do not force the battery into the compartment. You may damage the battery or the device. If the
battery does not snap easily into place, reposition the battery in the compartment and try again.
Make sure the battery is firmly in place and can't be removed without pressing the battery release button.
OpenTopic | Batteries | 57