User's Manual
The device says "louder" when the + button is pressed and "softer" when the — button is pressed. If the volume of
the voice is at the loudest possible setting, it says, "This is loudest." If the volume of the voice is at the softest possible
setting, it says, "This is softest."
Adjusting the Voice's Speed
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (T5-series and
T2-series) or solid green (T1).
1. Press the Operator button.
The device says "Current operator is operator name. Select menu item."
2. Press the + or — button until the device says "Change speed."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Speed is the fourth menu item in the list.
4. Press the + button to make the voice faster or the — button to make the voice slower.
The device says "faster" each time you press the + button and "slower" each time you press the — button. If the
speed of the voice is at the fastest possible setting, the device says "This is fastest." If the speed of the voice is at the
slowest possible setting, it says "This is slowest."
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before you press
the Operator button.
5. When the voice is speaking as quickly or as slowly as you want, press the Operator button to save the new speed
setting.
Changing the Speaker's Gender
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (T5-series and
T2-series) or solid green (T1).
1. Press the Operator button.
The device says "Current operator is operator name. Select menu item."
2. Press the + or — button until it says, "Change speaker."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Speaker is the sixth menu item in the list.
4. Press the + or — button to hear the next speaker.
The device says, "This is female" when it toggles to the female voice, or "This is male" to indicate the male voice.
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before you press
the Operator button.
5. When you hear the speaker you want to use, press the Operator button to select that speaker.
Repeating the Current Prompt
• Say "Talkman continue."
24 | OpenTopic | Talkman
®
Devices