User's Manual

• the wearable computer starts over at the beginning of the task
• if you are in the process of retraining vocabulary, the wearable computer will send all vocabulary word templates
to the host computer when the device is turned back on. Do not do anything until the templates have been sent
to the host.
When the battery is replaced and the wearable computer is turned back on, it boots and attempts to load the current task
and operator. Once the task and operator have successfully loaded, the device behaves identically to a one that has just
had a new task or operator loaded.
Adjusting the Voice's Pitch
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (T5-series and
T2-series) or solid green (T1).
Note: You can only adjust the pitch for certain languages and certain Voices.
1. Press the Operator button.
The device says "Current operator is operator name. Select menu item."
2. Press the + or — button until the device says "Change pitch."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Pitch is the fifth menu item in the list.
4. Press the + button to make the voice higher or the — button to make the voice lower.
The device says "higher" each time you press the + button and "lower" each time you press the — button. If the pitch
of the voice is at the highest possible setting, it says "This is highest." If the pitch of the voice is at the lowest possible
setting, it says "This is lowest."
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before you press
the Operator button.
5. When the pitch reaches the level you want, press the Operator button to save the new pitch setting.
Adjusting the Voice's Volume Using Voice
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (T5-series and
T2-series) or solid green (T1).
1. Say "Talkman volume".
2. Say "louder" to increase the volume or "softer" to decrease the volume.
If the device says "This is softest" or "This is loudest", you cannot make the volume any louder or softer.
3. When the voice is as loud or as soft as you want it, say "Talkman continue" to return to work.
Adjusting the Voice's Volume Using the Device Buttons
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (T5-series and
T2-series) or solid green (T1).
Press the + button to make the voice louder or the — button to make the voice softer.
OpenTopic | Talkman
®
Devices | 23