User's Manual
Table Of Contents
- Contents
- About Honeywell Documentation
- Introduction
- Using the Talkman A500
- Charging an A500 or T5 Device
- Charging an A500 or T5 Battery in a Device
- Charging an A500 or T5-Series Battery
- Removing an A500, T2-Series or T5-Series Device From a Charger
- Inserting a Battery into a Talkman A500, T5-Series or T2-Series Device
- Removing a Battery from a Talkman A500, T5-Series or T2-Series Device
- Battery Warm-Up Time
- Easy Configuration
- Turning a Talkman Device On
- Turning a Talkman Device Off
- About LED Indicators
- Loading an Operator's Templates
- Adjusting the Voice
- Understanding Talkman Commands
- Options for Hearing Impaired Users
- Cleaning Procedures for Honeywell Equipment
- Charging an A500 or T5 Device
- Talkman A500 VMT
- Mounts for Talkman A500/T5 VMT
- Talkman A500/T5 VMT Accessories
- Positioning the Talkman A500/T5 VMT
- Installing the Mounting Brackets for a Talkman A500/T5 VMT
- Connecting Cables to the Power Supply and Attaching the Power Supply to a Vehicle
- Connecting the A500/T5 VMT Device to a Vehicle's Power Source
- Removal of an A500/T5 VMT Device from Vehicle
- VMT Installation Best Practices
- Chargers
- Troubleshooting Equipment Problems
- I Can't Hear Anything Through the Headset
- The Scanner will not Scan
- The Device Beeps Every Few Seconds
- The Device Will Not Load a Voice Application
- The Device Will Not Load an Operator Template
- The Device Does Not Respond to Button Presses
- The Device Will Not Turn On
- The Device Keeps Shutting Off
- Troubleshooting Guide for the Talkman A500/T5 Battery Charger
- Troubleshooting Problems Indicated by LED
- About Error Messages
- Contacting Technical Support
- About Sending Equipment Back for Repairs
- Troubleshooting VMT Configurations
- Specifications
- Accessories
- Part Numbers
- Template Training Options
- Compliance
- Index
SolutionTextNumber
Error: Unable to initialize
Debug/training COM port.
0x1423
Socket host name or IP address
bad.
0x1425
1.
Turn the device off and then turn it back on again.
2.
Reboot the device.
Socket service name or port bad.0x1426
3.
Reload VoiceClient.
4.
Reload the task.
5.
Verify the task's output data records (ODRs) and
lookup tables (LUTs) have correct and valid socket
host and service information. If you need assistance,
contact Vocollect.
Unable to send file via socket.
Unable to open.
0x1427
1.
Turn the device off and then turn it back on again.
2.
Reboot the device.
3.
Reload VoiceClient.
—Invalid Terminal Manager service
name or port.
0x142a
—Telnet session manager failed to
start.
0x142c
—Telnet client process failed to start.0x142d
—Telnet VT220 emulation process
failed to start.
0x142e
Unable to open send data file, for
telnet send.
0x142f
1.
Turn the device off and then turn it back on again.
2.
Reboot the device.
Error, Unable to Initialize Printer
Port.
0x1430
3.
Reload VoiceClient.
Unable to print label, unable to open
file.
0x1431
Printer Error, Process Message
Service Send Error.
0x1432
Comm Error, Unable to spawn
printer process.
0x1433
File Manager initialization failed.0x1600
File Manager process message
service receive failed.
0x1601
—Warning, low flash memory.0x1602
—Warning, low flash memory. You
must upload your collected data
now.
0x1603
Process history data initialization
failed.
0x1a01
1.
Turn the device off and then turn it back on again.
2.
Reboot the device.
Process history data process
message service receive failed.
0x1a02
3.
Reload VoiceClient.
Confidential: For informational use by Honeywell resellers and customers only
Troubleshooting Equipment Problems | 51