User's Manual
Table Of Contents
- Contents
- About Honeywell Documentation
- Introduction
- Using the Talkman A500
- Charging an A500 or T5 Device
- Charging an A500 or T5 Battery in a Device
- Charging an A500 or T5-Series Battery
- Removing an A500, T2-Series or T5-Series Device From a Charger
- Inserting a Battery into a Talkman A500, T5-Series or T2-Series Device
- Removing a Battery from a Talkman A500, T5-Series or T2-Series Device
- Battery Warm-Up Time
- Easy Configuration
- Turning a Talkman Device On
- Turning a Talkman Device Off
- About LED Indicators
- Loading an Operator's Templates
- Adjusting the Voice
- Understanding Talkman Commands
- Options for Hearing Impaired Users
- Cleaning Procedures for Honeywell Equipment
- Charging an A500 or T5 Device
- Talkman A500 VMT
- Mounts for Talkman A500/T5 VMT
- Talkman A500/T5 VMT Accessories
- Positioning the Talkman A500/T5 VMT
- Installing the Mounting Brackets for a Talkman A500/T5 VMT
- Connecting Cables to the Power Supply and Attaching the Power Supply to a Vehicle
- Connecting the A500/T5 VMT Device to a Vehicle's Power Source
- Removal of an A500/T5 VMT Device from Vehicle
- VMT Installation Best Practices
- Chargers
- Troubleshooting Equipment Problems
- I Can't Hear Anything Through the Headset
- The Scanner will not Scan
- The Device Beeps Every Few Seconds
- The Device Will Not Load a Voice Application
- The Device Will Not Load an Operator Template
- The Device Does Not Respond to Button Presses
- The Device Will Not Turn On
- The Device Keeps Shutting Off
- Troubleshooting Guide for the Talkman A500/T5 Battery Charger
- Troubleshooting Problems Indicated by LED
- About Error Messages
- Contacting Technical Support
- About Sending Equipment Back for Repairs
- Troubleshooting VMT Configurations
- Specifications
- Accessories
- Part Numbers
- Template Training Options
- Compliance
- Index
SolutionTextNumber
Failed to write dialog terminal-off
files in the terminal charger after
task or operator load.
0x1215
1.
Reload the operator.
2.
Reload the task.
3.
Reload VoiceClient.
—Retraining word failed. Please try
again.
0x1216
—Initializing operator failed. Please
reload operator.
0x1217
—Failed to load task phonetic file.
Task load failed.
0x1218
—Failed to load task audio file. Task
load failed.
0x1219
Communications error: Process
message service receive error.
0x1402
1.
Turn the device off and then turn it back on again.
2.
Reboot the device.
Communications error: Process
message service send error.
0x1403
3.
Reload VoiceClient.
Communications error: Process
message service GetIdFromName
error.
0x1406
Communications error: Unable to
close Vocollect configuration file.
0x140a
Communications error: Unable to
delete Vocollect configuration file.
0x140f
Communications error: Vocollect
network transport information
registration failed.
0x1410
Communications error:
Unrecognized process message
service message.
0x1411
Communications error: Unable to
spawn bar code process.
0x1414
Communications error: Unable to
spawn serial process.
0x1415
Communications error: Bad FTP
command.
0x1417
Communications error: Bad socket
command.
0x141b
Error: Unable to initialize bar code
port.
0x1420
Display Mode host name or IP
address bad.
0x1421
Display Mode service name or port
bad.
0x1422
Confidential: For informational use by Honeywell resellers and customers only
50 | Vocollect Talkman A500 Product Guide