User's Manual
Table Of Contents
- Contents
- About Honeywell Documentation
- Introduction
- Using the Talkman A500
- Charging an A500 or T5 Device
- Charging an A500 or T5 Battery in a Device
- Charging an A500 or T5-Series Battery
- Removing an A500, T2-Series or T5-Series Device From a Charger
- Inserting a Battery into a Talkman A500, T5-Series or T2-Series Device
- Removing a Battery from a Talkman A500, T5-Series or T2-Series Device
- Battery Warm-Up Time
- Easy Configuration
- Turning a Talkman Device On
- Turning a Talkman Device Off
- About LED Indicators
- Loading an Operator's Templates
- Adjusting the Voice
- Understanding Talkman Commands
- Options for Hearing Impaired Users
- Cleaning Procedures for Honeywell Equipment
- Charging an A500 or T5 Device
- Talkman A500 VMT
- Mounts for Talkman A500/T5 VMT
- Talkman A500/T5 VMT Accessories
- Positioning the Talkman A500/T5 VMT
- Installing the Mounting Brackets for a Talkman A500/T5 VMT
- Connecting Cables to the Power Supply and Attaching the Power Supply to a Vehicle
- Connecting the A500/T5 VMT Device to a Vehicle's Power Source
- Removal of an A500/T5 VMT Device from Vehicle
- VMT Installation Best Practices
- Chargers
- Troubleshooting Equipment Problems
- I Can't Hear Anything Through the Headset
- The Scanner will not Scan
- The Device Beeps Every Few Seconds
- The Device Will Not Load a Voice Application
- The Device Will Not Load an Operator Template
- The Device Does Not Respond to Button Presses
- The Device Will Not Turn On
- The Device Keeps Shutting Off
- Troubleshooting Guide for the Talkman A500/T5 Battery Charger
- Troubleshooting Problems Indicated by LED
- About Error Messages
- Contacting Technical Support
- About Sending Equipment Back for Repairs
- Troubleshooting VMT Configurations
- Specifications
- Accessories
- Part Numbers
- Template Training Options
- Compliance
- Index
SolutionTextNumber
2.
Reboot the device.
3.
Reload VoiceClient.
—Unable to train words. Not enough
free flash memory.
0x060e
Speak failed to initialize properly.0x0802
1.
Check the crashdump file. For more information,
see the VoiceConsole online help.Speech-out failed. Audio system
failure.
0x0804
2.
Turn the device off and then turn it back on again.
3.
Reboot the device.
Dialog power-off failed.0x1201
4.
Reload VoiceClient.
—Task not loaded. No task name
available.
0x1202
—OperLoad failed -- TmplSend busy.0x1203
—Operator load failed.0x1204
—Corrupted operator data.0x1205
—Noise sample failed.0x1206
—There are no operators in this team.0x1207
—Unable to retrieve operator files.0x1208
—Internal error loading operator.0x1209
—Task load failed.0x120a
—Self test mode set, but no script file
found.
0x120b
—No task list file found. Task
unchanged.
0x120c
—Software error while changing task.
Task unchanged.
0x120d
—Failed to load look up table. Task
load failed.
0x120e
—Failed to load terminal emulation
configuration file. Task load failed.
0x1210
—Corrupt terminal emulation
configuration file. Task load failed.
0x1211
—Corrupt task file. Task load failed.0x1212
—Failed to load task Vocollect
configuration file. Task load failed.
0x1213
—Failed to write the output data record
network transport information
registration file. Task load failed.
0x1214
Confidential: For informational use by Honeywell resellers and customers only
Troubleshooting Equipment Problems | 49