User's Manual

3.
Press the Operator button.
If you use the + button to scroll through the options, Change Speed is the fourth menu item in the list.
4.
Press the + button to make the voice faster or the — button to make the voice slower.
The device says "faster" each time you press the + button and "slower" each time you press the — button.
If the speed of the voice is at the fastest possible setting, the device says "This is fastest." If the speed of
the voice is at the slowest possible setting, it says "This is slowest."
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before
you press the Operator button.
5.
When the voice is speaking as quickly or as slowly as you want, press the Operator button to save the
new speed setting.
Changing the Speaker's Gender
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green
(A500, T5-series and T2-series), solid green (T1), or have a solid green ring segment or a rotating green ring
(A700).
1.
Press the Operator button.
The device says "Current operator is operator name. Select menu item."
2.
Press the + or — button until it says, "Change speaker."
3.
Press the Operator button.
If you use the + button to scroll through the options, Change Speaker is the sixth menu item in the list.
4.
Press the + or — button to hear the next speaker.
The device says, "This is female" when it toggles to the female voice, or "This is male" to indicate the male
voice.
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before
you press the Operator button.
5.
When you hear the speaker you want to use, press the Operator button to select that speaker.
Understanding Talkman Commands
The Talkman device prompts the operator for responses that are specific to the voice-directed work he or
she is performing. Several basic Talkman commands, however, can be spoken by the operator at almost any
time while using the device.
Spoken CommandYou want to...
"Say again"hear the current prompt again
"Talkman sleep"put the device in sleep mode
"Talkman wake up"wake up the device
"Talkman backup"erase the previous response so you can respond to the same prompt
again (VoiceClient only)
"Talkman battery status"check the remaining charge on a Talkman A700 battery
(VoiceCatalyst 2.0 and newer only)
"Talkman help"hear instructions for your response to the current prompt
Confidential: For informational use by Honeywell resellers and customers only
Using the Talkman A500 | 25