User's Manual
Table Of Contents
- Contents
- About Honeywell Documentation
- Introduction
- Using the Talkman A500
- Charging an A500 or T5 Device
- Charging an A500 or T5 Battery in a Device
- Charging an A500 or T5-Series Battery
- Removing an A500, T2-Series or T5-Series Device From a Charger
- Inserting a Battery into a Talkman A500, T5-Series or T2-Series Device
- Removing a Battery from a Talkman A500, T5-Series or T2-Series Device
- Battery Warm-Up Time
- Easy Configuration
- Turning a Talkman Device On
- Turning a Talkman Device Off
- About LED Indicators
- Loading an Operator's Templates
- Adjusting the Voice
- Understanding Talkman Commands
- Options for Hearing Impaired Users
- Cleaning Procedures for Honeywell Equipment
- Charging an A500 or T5 Device
- Talkman A500 VMT
- Mounts for Talkman A500/T5 VMT
- Talkman A500/T5 VMT Accessories
- Positioning the Talkman A500/T5 VMT
- Installing the Mounting Brackets for a Talkman A500/T5 VMT
- Connecting Cables to the Power Supply and Attaching the Power Supply to a Vehicle
- Connecting the A500/T5 VMT Device to a Vehicle's Power Source
- Removal of an A500/T5 VMT Device from Vehicle
- VMT Installation Best Practices
- Chargers
- Troubleshooting Equipment Problems
- I Can't Hear Anything Through the Headset
- The Scanner will not Scan
- The Device Beeps Every Few Seconds
- The Device Will Not Load a Voice Application
- The Device Will Not Load an Operator Template
- The Device Does Not Respond to Button Presses
- The Device Will Not Turn On
- The Device Keeps Shutting Off
- Troubleshooting Guide for the Talkman A500/T5 Battery Charger
- Troubleshooting Problems Indicated by LED
- About Error Messages
- Contacting Technical Support
- About Sending Equipment Back for Repairs
- Troubleshooting VMT Configurations
- Specifications
- Accessories
- Part Numbers
- Template Training Options
- Compliance
- Index
About LED Indicators
Vocollect Talkman devices, SRX and SRX2 headsets, and their chargers have LEDs that indicate the state
of the equipment. These LEDs may be on, off or blink. In some cases an LED will blink, alternating between
two colors.
If the LEDs indicate that there is a problem, refer to information on troubleshooting to solve the problem. See
also Troubleshooting Problems Indicated by LED.
A500 Device LED Indicators
Dispositivo A500StatusLED
Device is onOnGreen
The device is in a chargerFast Blink
One of the following:Slow Blink
• the device is in sleep mode and
not in a charger
• the voice application selection
menu is in use
• certain portions of software are
loading
Device is turning on
Device is turning off
On BrieflyRed
Error, contact system administratorOn Continuously
One of the following:Blinking
• retrieving and loading an
operator from VoiceConsole
• retrieving, reading and loading
a voice application from
VoiceConsole
• certain portions of software are
loading
Wi-Fi offOffAmber/Yellow
Wi-Fi on but not connectedFast Blink
Wi-Fi is on and connecting to a
wireless network
Slow Blink
Bluetooth offOffBlue
(Bluetooth indicator)
DiscoveringOn
PagingFast Blink
ConnectedSlow Blink
Device is discoverableSeries of Blinks
Confidential: For informational use by Honeywell resellers and customers only
22 | Vocollect Talkman A500 Product Guide