User's Manual
Table Of Contents
- Contents
- About Honeywell Documentation
- Introduction
- Using the Talkman A500
- Charging an A500 or T5 Device
- Charging an A500 or T5 Battery in a Device
- Charging an A500 or T5-Series Battery
- Removing an A500, T2-Series or T5-Series Device From a Charger
- Inserting a Battery into a Talkman A500, T5-Series or T2-Series Device
- Removing a Battery from a Talkman A500, T5-Series or T2-Series Device
- Battery Warm-Up Time
- Easy Configuration
- Turning a Talkman Device On
- Turning a Talkman Device Off
- About LED Indicators
- Loading an Operator's Templates
- Adjusting the Voice
- Understanding Talkman Commands
- Options for Hearing Impaired Users
- Cleaning Procedures for Honeywell Equipment
- Charging an A500 or T5 Device
- Talkman A500 VMT
- Mounts for Talkman A500/T5 VMT
- Talkman A500/T5 VMT Accessories
- Positioning the Talkman A500/T5 VMT
- Installing the Mounting Brackets for a Talkman A500/T5 VMT
- Connecting Cables to the Power Supply and Attaching the Power Supply to a Vehicle
- Connecting the A500/T5 VMT Device to a Vehicle's Power Source
- Removal of an A500/T5 VMT Device from Vehicle
- VMT Installation Best Practices
- Chargers
- Troubleshooting Equipment Problems
- I Can't Hear Anything Through the Headset
- The Scanner will not Scan
- The Device Beeps Every Few Seconds
- The Device Will Not Load a Voice Application
- The Device Will Not Load an Operator Template
- The Device Does Not Respond to Button Presses
- The Device Will Not Turn On
- The Device Keeps Shutting Off
- Troubleshooting Guide for the Talkman A500/T5 Battery Charger
- Troubleshooting Problems Indicated by LED
- About Error Messages
- Contacting Technical Support
- About Sending Equipment Back for Repairs
- Troubleshooting VMT Configurations
- Specifications
- Accessories
- Part Numbers
- Template Training Options
- Compliance
- Index
Chapter 2
Using the Talkman A500
Figure 1: Getting to Know the Vocollect Talkman
®
A500
7 - Minus (—) button
8 - Operator button
4 - Headset port
5 - Play/Pause button
1 - Battery
2 - Battery release button
9 - Belt clip6 - Plus (+) button3 - Maintenance port
The Talkman
®
A500 couples a rugged design to function in harsh warehouse environments with wireless
capabilities. The device supports Bluetooth technology to connect to display devices as well as other peripherals
and headsets.
In the Vocollect Talkman product line, the Talkman A500 offers expanded operations with a more powerful
processor, more available memory, and a more robust radio.
The A500 uses the same batteries, chargers, and headsets as the T5-Series devices. Both models use the
Vocollect VoiceClient voice software, but the A500 is designed to take advantage of Vocollect VoiceCatalyst
®
functionality for best performance and enhanced features.
Confidential: For informational use by Honeywell resellers and customers only