6.7
Table Of Contents
- VMware ESXi Upgrade
- Contents
- About VMware ESXi Upgrade
- Introduction to vSphere Upgrade
- Upgrading ESXi Hosts
- ESXi Requirements
- Before Upgrading ESXi Hosts
- Upgrading Hosts That Have Third-Party Custom VIBs
- Media Options for Booting the ESXi Installer
- Download and Burn the ESXi Installer ISO Image to a CD or DVD
- Format a USB Flash Drive to Boot the ESXi Installation or Upgrade
- Create a USB Flash Drive to Store the ESXi Installation Script or Upgrade Script
- Create an Installer ISO Image with a Custom Installation or Upgrade Script
- PXE Booting the ESXi Installer
- Installing and Booting ESXi with Software FCoE
- Using Remote Management Applications
- Download the ESXi Installer
- Upgrade Hosts Interactively
- Installing or Upgrading Hosts by Using a Script
- Enter Boot Options to Start an Installation or Upgrade Script
- Boot Options
- About Installation and Upgrade Scripts
- Install or Upgrade ESXi from a CD or DVD by Using a Script
- Install or Upgrade ESXi from a USB Flash Drive by Using a Script
- Performing a Scripted Installation or Upgrade of ESXi by Using PXE to Boot the Installer
- PXE Booting the ESXi Installer
- Upgrading Hosts by Using esxcli Commands
- VIBs, Image Profiles, and Software Depots
- Understanding Acceptance Levels for VIBS and Hosts
- Determine Whether an Update Requires the Host to Be in Maintenance Mode or to Be Rebooted
- Place a Host in Maintenance Mode
- Update a Host with Individual VIBs
- Upgrade or Update a Host with Image Profiles
- Update ESXi Hosts by Using Zip Files
- Remove VIBs from a Host
- Adding Third-Party Extensions to Hosts with an esxcli Command
- Perform a Dry Run of an esxcli Installation or Upgrade
- Display the Installed VIBs and Profiles That Will Be Active After the Next Host Reboot
- Display the Image Profile and Acceptance Level of the Host
- After You Upgrade ESXi Hosts
- Using vSphere Auto Deploy to Reprovision Hosts
- Collect Logs to Troubleshoot ESXi Hosts
n
Norwegian
n
Polish
n
Portuguese
n
Russian
n
Slovenian
n
Spanish
n
Swedish
n
Swiss French
n
Swiss German
n
Turkish
n
Ukrainian
n
United Kingdom
n
US Default
n
US Dvorak
serialnum or vmserialnum (optional)
Deprecated in ESXi 5.0.x. Supported in ESXi 5.1 and later. Configures licensing. If not included, ESXi
installs in evaluation mode.
--esx=<license-key>
Specifies the vSphere license key to use. The format is 5 five-character
groups (XXXXX-XXXXX-XXXXX-XXXXX-XXXXX).
network (optional)
Specifies a network address for the system.
--bootproto=[dhcp|static]
Specifies whether to obtain the network settings from DHCP or set them
manually.
--device=
Specifies either the MAC address of the network card or the device name,
in the form vmnicNN, as in vmnic0. This options refers to the uplink device
for the virtual switch.
--ip=
Sets an IP address for the machine to be installed, in the form
xxx.xxx.xxx.xxx. Required with the --bootproto=static option and
ignored otherwise.
--gateway=
Designates the default gateway as an IP address, in the form
xxx.xxx.xxx.xxx. Used with the --bootproto=static option.
VMware ESXi Upgrade
VMware, Inc. 42