6.5.1

Table Of Contents
Adapter Information Description
Model Model of the adapter.
iSCSI Name Unique name formed according to iSCSI standards that identifies the iSCSI adapter. You can
edit the iSCSI name.
iSCSI Alias A friendly name used instead of the iSCSI name. You can edit the iSCSI alias.
IP Address Address assigned to the iSCSI HBA.
Targets Number of targets accessed through the adapter.
Devices All storage devices or LUNs the adapter can access.
Paths All paths the adapter uses to access storage devices.
Modify General Properties for iSCSI Adapters
You can change the default iSCSI name and alias assigned to your iSCSI adapters. For the independent
hardware iSCSI adapters, you can also change the default IP settings.
Important When you modify any default properties for your iSCSI adapters, make sure to use correct
formats for their names and IP addresses.
Prerequisites
Required privilege: Host .Configuration.Storage Partition Configuration
Procedure
1 Browse to the host in the vSphere Web Client navigator.
2 Click the Configure tab.
3 Under Storage, click Storage Adapters, and select the adapter (vmhba#) to configure.
4 Under Adapter Details, click the Properties tab, and click Edit in the General panel.
5 (Optional) Modify the following general properties.
Option Description
iSCSI Name Unique name formed according to iSCSI standards that identifies the iSCSI
adapter. If you change the name, make sure that the name you enter is worldwide
unique and properly formatted. Otherwise, certain storage devices might not
recognize the iSCSI adapter.
iSCSI Alias A friendly name you use instead of the iSCSI name.
If you change the iSCSI name, it is used for new iSCSI sessions. For existing sessions, the new settings
are not used until you log out and log in again.
Edit Network Settings for Hardware iSCSI
After you install an independent hardware iSCSI adapter, you might need to change its default network
settings so that the adapter is configured properly for the iSCSI SAN.
vSphere Storage
VMware, Inc. 76