6.5.1

Table Of Contents
Create a Virtual Volumes Datastore
You use the New Datastore wizard to create a Virtual Volumes datastore.
Procedure
1 In the vSphere Web Client navigator, select Global Inventory Lists > Datastores.
2 Click the New Datastore icon.
3 Specify the placement location for the datastore.
4 Select VVol as the datastore type.
5 From the list of storage containers, select a backing storage container and type the datastore name.
Make sure to use the name that does not duplicate another datastore name in your data center
environment.
If you mount the same Virtual Volumes datastore to several hosts, the name of the datastore must be
consistent across all hosts.
6 Select the hosts that require access to the datastore.
7 Review the configuration options and click Finish.
What to do next
After you create the Virtual Volumes datastore, you can perform such datastore operations as renaming
the datastore, browsing datastore files, unmounting the datastore, and so on.
You cannot add the Virtual Volumes datastore to a datastore cluster.
Managing Duplicate VMFS Datastores
When a storage device contains a VMFS datastore copy, you can mount the datastore with the existing
signature or assign a new signature.
Each VMFS datastore created in a storage disk has a unique signature, also called UUID, that is stored in
the file system superblock. When the storage disk is replicated or its snapshot is taken on the storage
side, the resulting disk copy is identical, byte-for-byte, with the original disk. For example, if the original
storage device contains a VMFS datastore with UUIDX, the disk copy appears to contain a datastore
copy with the same UUIDX.
In addition to LUN snapshots and replications, the following device operations cause ESXi to mark the
datastore on the device as a copy of the original datastore:
n
LUN ID changes
n
SCSI device type changes, for example, from SCSI-2 to SCSI-3
n
SPC-2 compliancy enablement
vSphere Storage
VMware, Inc. 180