7.0

Prerequisites
n PowerCLI and prerequisite software is installed. See Install vSphere ESXi Image Builder and
Prerequisite Software.
n You have access to a depot that includes a base image and one or more VIBs. VMware and
VMware partners make public depots, accessible by a URL, available. VMware or VMware
partners can create a ZIP file that you can download to your local environment and access by
using a file path.
Procedure
1 In a PowerCLI session, run the Add-EsxSoftwareDepot cmdlet for each depot you want to
work with.
Option Action
Remote depot Run Add-EsxSoftwareDepot -DepotUrl <depot_url>.
ZIP file a Download the ZIP file to a local file system.
b Run Add-EsxSoftwareDepot -DepotUrl C:\<file_path>\<offline-
bundle>.zip
The cmdlet returns one or more SoftwareDepot objects.
2 Use a pipeline to pass the image profile you intend to edit to format-list to see detailed
information.
In this example, the image profile created in Create New Image Profiles Workflow contains
only the base image. A newly created image profile is not included in the depot. Instead, you
access the image profile by name or by binding it to a variable.
Get-EsxImageProfile "Test #2" | format-list
PowerShell returns the information.
Name : Test #2
Vendor : Vendor42
...
VibList : {esx-base 5.0.0.-...,}
3 (Optional) If you are adding a VIB with a lower acceptance level than that of the image profile,
change the acceptance level of the image profile.
Set-EsxImageProfile -ImageProfile "Test #2" -AcceptanceLevel VMwareAccepted
VMware ESXi Installation and Setup
VMware, Inc. 73