6.7

Table Of Contents
Procedure
1 Prepare for an Upgrade to ATS-Only Locking
You must perform several steps to prepare your environment for an online or offline upgrade to ATS-
only locking.
2 Upgrade Locking Mechanism to the ATS-Only Type
If a VMFS datastore is ATS-only compatible, you can upgrade its locking mechanism from ATS
+SCSI to ATS-only.
Prepare for an Upgrade to ATS-Only Locking
You must perform several steps to prepare your environment for an online or offline upgrade to ATS-only
locking.
Procedure
1 Upgrade all hosts that access the VMFS5 datastore to the newest version of vSphere.
2 Determine whether the datastore is eligible for an upgrade of its current locking mechanism by
running the esxcli storage vmfs lockmode list command.
The following sample output indicates that the datastore is eligible for an upgrade. It also shows the
current locking mechanism and the upgrade mode available for the datastore.
Locking Mode ATS Compatible ATS Upgrade Modes
------------ -------------- -----------------
ATS+SCSI true Online or Offline
3 Depending on the upgrade mode available for the datastore, perform one of the following actions:
Upgrade Mode Action
Online Verify that all hosts have consistent storage connectivity to the VMFS datastore.
Offline Verify that no hosts are actively using the datastore.
Upgrade Locking Mechanism to the ATS-Only Type
If a VMFS datastore is ATS-only compatible, you can upgrade its locking mechanism from ATS+SCSI to
ATS-only.
Most datastores that do not span multiple extents are eligible for an online upgrade. While you perform
the online upgrade on one of the ESXi hosts, other hosts can continue using the datastore. The online
upgrade completes only after all hosts have closed the datastore.
Prerequisites
If you plan to complete the upgrade of the locking mechanism by putting the datastore into maintenance
mode, disable Storage DRS. This prerequisite applies only to an online upgrade.
vSphere Storage
VMware, Inc. 162