6.7

Table Of Contents
n
RP1 was created with a reservation of 4GHz. Two virtual machines. (VM1 and VM7) of 2GHz each
are powered on (Reservation Used: 4GHz). No resources are left for powering on additional virtual
machines. VM6 is shown as not powered on. It consumes none of the reservation.
n
RP2 was created with a reservation of 4GHz. Two virtual machines of 1GHz and 2GHz are powered
on (Reservation Used: 3GHz). 1GHz remains unreserved.
n
RP3 was created with a reservation of 3GHz. One virtual machine with 3GHz is powered on. No
resources for powering on additional virtual machines are available.
The following figure shows an example of a valid cluster with some resource pools (RP1 and RP3) using
reservation type Expandable.
Figure 122. Valid Cluster with Expandable Resource Pools
cluster
Total Capacity: 16G
Reserved Capacity: 16G
Available Capacity: 0G
RP1 (expandable)
Reservation: 4G
Reservation Used: 6G
Unreserved: 0G
RP2
Reservation: 5G
Reservation Used: 3G
Unreserved: 2G
RP3 (expandable)
Reservation: 5G
Reservation Used: 5G
Unreserved: 0G
VM1, 2G
VM7, 2G
VM2, 2G
VM4, 1G VM8, 2G
VM3, 3G VM5, 2GVM6, 2G
A valid cluster can be configured as follows:
n
A cluster with total resources of 16GHz.
n
RP1 and RP3 are of type Expandable, RP2 is of type Fixed.
n
The total reservation used of the three resource pools combined is 16GHz (6GHz for RP1, 5GHz for
RP2, and 5GHz for RP3). 16GHz shows up as the Reserved Capacity for the cluster at top level.
n
RP1 was created with a reservation of 4GHz. Three virtual machines of 2GHz each are powered on.
Two of those virtual machines (for example, VM1 and VM7) can use RP1’s reservations, the third
virtual machine (VM6) can use reservations from the cluster’s resource pool. (If the type of this
resource pool were Fixed, you could not power on the additional virtual machine.)
vSphere Resource Management
VMware, Inc. 88