6.0.1
Table Of Contents
- vSphere Monitoring and Performance
- Contents
- About vSphere Monitoring and Performance
- Updated Information
- Monitoring Inventory Objects with Performance Charts
- Performance Chart Types
- Data Counters
- Metric Groups in vSphere
- Data Collection Intervals
- Data Collection Levels
- View Performance Charts
- Performance Charts Options Available Under the View Menu
- Overview Performance Charts
- Clusters
- Datacenters
- Datastores
- Disk Space (Data Counters)
- Disk Space (File Types)
- Disk Space (Virtual Machines)
- Storage I/O Control Normalized Latency
- Storage I/O Control Aggregate IOPs
- Storage I/O Control Activity
- Average Device Latency per Host
- Maximum Queue Depth per Host
- Read IOPs per Host
- Write IOPs per Host
- Average Read Latency per Virtual Machine Disk
- Average Write Latency per Virtual Machine Disk
- Read IOPs per Virtual Machine Disk
- Write IOPs per Virtual Machine Disk
- Virtual Machine Observed Latency per Datastore
- Hosts
- Resource Pools
- vApps
- Virtual Machines
- CPU (%)
- CPU Usage (MHz)
- Disk (Average)
- Disk (Rate)
- Disk (Number)
- Virtual Disk Requests (Number)
- Virtual Disk Rate (KBps)
- Memory (Usage)
- Memory (Balloon)
- Memory (Swap Rate)
- Memory (Data Counters)
- Network (Usage)
- Network (Rate)
- Network (Packets)
- Disk Space (Data Counters)
- Disk Space (Datastores)
- Disk Space (File Types)
- Fault Tolerance Performance Counters
- Working with Advanced and Custom Charts
- Troubleshoot and Enhance Performance
- Monitoring Guest Operating System Performance
- Monitoring Host Health Status
- Monitoring Events, Alarms, and Automated Actions
- View Events
- View System Logs
- Export Events Data
- View Triggered Alarms and Alarm Definitions
- Live Refresh of Recent Tasks and Alarms
- Set an Alarm
- Acknowledge Triggered Alarms
- Reset Triggered Event Alarms
- Preconfigured vSphere Alarms
- Monitoring Solutions with the vCenter Solutions Manager
- Monitoring the Health of Services and Nodes
- Performance Monitoring Utilities: resxtop and esxtop
- Using the vimtop Plug-In to Monitor the Resource Usage of Services
- Monitoring Networked Devices with SNMP and vSphere
- Using SNMP Traps with vCenter Server
- Configure SNMP for ESXi
- SNMP Diagnostics
- Monitor Guest Operating Systems with SNMP
- VMware MIB Files
- SNMPv2 Diagnostic Counters
- System Log Files
- Index
Table 1‑119. Networking Performance Enhancement Advice (Continued)
# Resolution
8 Verify that the reported speed and duplex settings for the physical NIC match the hardware expectations and that
the hardware is configured to run at its maximum capability. For example, verify that NICs with 1Gbps are not
reset to 100Mbps because they are connected to an older switch.
9 Verify that all NICs are running in full duplex mode. Hardware connectivity problems might result in a NIC
resetting itself to a lower speed or half duplex mode.
10 Use vNICs that are TCP Segmentation Offload (TSO)-capable, and verify that TSO-Jumbo Frames are enabled
where possible.
Space in GB
The Space in GB chart displays space utilization data counters for virtual machines.
This chart is located in the Storage view of the virtual machine Performance tab.
Table 1‑120. Data Counters
Chart Label Description
Allocated Total amount of logical datastore space provisioned by an administrator for the
virtual machine. It is the storage size up to which the virtual machine files on
datastores can grow. This includes log files, VMX files, and other miscellaneous files.
Allocated space is not always in use.
n
Counter: provisioned
n
Stats Type: Absolute
n
Unit: Gigabytes (GB)
n
Rollup Type: Latest
n
Collection Level: 1
Used Amount of physical datastore space in use by the virtual machine files.
n
Counter: used
n
Stats Type: Absolute
n
Unit: Gigabytes (GB)
n
Rollup Type: Latest
n
Collection Level: 1
Not Shared Amount of datastore space that belongs only to this virtual machine and is not shared
with other virtual machines. Only unshared space is guaranteed to be reclaimed for
the virtual machine if, for example, it is moved to a different datastore and then back
again.The value is an aggregate of all unshared space for the virtual machine, across
all datastores.
n
Counter: unshared
n
Stats Type: Absolute
n
Unit: Gigabytes (GB)
n
Rollup Type: Latest
n
Collection Level: 1
Chart Analysis
The datastore is at full capacity when the used space is equal to the capacity. Allocated space can be larger
than datastore capacity, for example, when you have snapshots and thin-provisioned disks. You can
provision more space to the datastore if possible, or you can add disks to the datastore or use shared
datastores.
If snapshot files are consuming a lot of datastore space, consider consolidating them to the virtual disk when
they are no longer needed. Consolidating the snapshots deletes the redo log files and removes the snapshots
from the vSphere Web Client user interface. For information about consolidating the data center, see the
vSphere documentation.
Chapter 1 Monitoring Inventory Objects with Performance Charts
VMware, Inc. 85