6.0.1
Table Of Contents
- vSphere Monitoring and Performance
- Contents
- About vSphere Monitoring and Performance
- Updated Information
- Monitoring Inventory Objects with Performance Charts
- Performance Chart Types
- Data Counters
- Metric Groups in vSphere
- Data Collection Intervals
- Data Collection Levels
- View Performance Charts
- Performance Charts Options Available Under the View Menu
- Overview Performance Charts
- Clusters
- Datacenters
- Datastores
- Disk Space (Data Counters)
- Disk Space (File Types)
- Disk Space (Virtual Machines)
- Storage I/O Control Normalized Latency
- Storage I/O Control Aggregate IOPs
- Storage I/O Control Activity
- Average Device Latency per Host
- Maximum Queue Depth per Host
- Read IOPs per Host
- Write IOPs per Host
- Average Read Latency per Virtual Machine Disk
- Average Write Latency per Virtual Machine Disk
- Read IOPs per Virtual Machine Disk
- Write IOPs per Virtual Machine Disk
- Virtual Machine Observed Latency per Datastore
- Hosts
- Resource Pools
- vApps
- Virtual Machines
- CPU (%)
- CPU Usage (MHz)
- Disk (Average)
- Disk (Rate)
- Disk (Number)
- Virtual Disk Requests (Number)
- Virtual Disk Rate (KBps)
- Memory (Usage)
- Memory (Balloon)
- Memory (Swap Rate)
- Memory (Data Counters)
- Network (Usage)
- Network (Rate)
- Network (Packets)
- Disk Space (Data Counters)
- Disk Space (Datastores)
- Disk Space (File Types)
- Fault Tolerance Performance Counters
- Working with Advanced and Custom Charts
- Troubleshoot and Enhance Performance
- Monitoring Guest Operating System Performance
- Monitoring Host Health Status
- Monitoring Events, Alarms, and Automated Actions
- View Events
- View System Logs
- Export Events Data
- View Triggered Alarms and Alarm Definitions
- Live Refresh of Recent Tasks and Alarms
- Set an Alarm
- Acknowledge Triggered Alarms
- Reset Triggered Event Alarms
- Preconfigured vSphere Alarms
- Monitoring Solutions with the vCenter Solutions Manager
- Monitoring the Health of Services and Nodes
- Performance Monitoring Utilities: resxtop and esxtop
- Using the vimtop Plug-In to Monitor the Resource Usage of Services
- Monitoring Networked Devices with SNMP and vSphere
- Using SNMP Traps with vCenter Server
- Configure SNMP for ESXi
- SNMP Diagnostics
- Monitor Guest Operating Systems with SNMP
- VMware MIB Files
- SNMPv2 Diagnostic Counters
- System Log Files
- Index
If you run ESXCLI commands through vCLI, you must supply connection options that specify the target
host and login credentials. If you use ESXCLI commands directly on a host using the ESXi Shell, you can use
the commands as given without specifying connection options. For more information on connection options
see vSphere Command-Line Interface Concepts and Examples.
Prerequisites
Configure the ESXi SNMP agent by using the ESXCLI commands. See Getting Started with vSphere Command-
Line Interfaces for more information on how to use ESXCLI.
Procedure
1 Run the esxcli system snmp set --hwsrc source command to configure the source for hardware
events.
Here, source is sensors or indications, for hardware event received from IPMI sensors or CIM
indications respectively.
2 (Optional) If the ESXi SNMP agent is not enabled, run the following command:
esxcli system snmp set --enable true
Configure the SNMP Agent to Filter Notifications
You can configure the ESXi SNMP agent to filter out notifications if you don't want your SNMP
management software to receive those notifications.
Prerequisites
Configure the ESXi SNMP agent by using the ESXCLI commands. See Getting Started with vSphere Command-
Line Interfaces for more information on how to use ESXCLI.
Procedure
1 Run the esxcli system snmp set command to filter notifications:
esxcli system snmp set --notraps oid_list
Here, oid_list is a list of OIDs for the notifications to filter, separated by commas. This list replaces any
OIDs that were previously specified using this command.
For example, to filter out coldStart (OID 1.3.6.1.4.1.6876.4.1.1.0) and warmStart (OID
1.3.6.1.4.1.6876.4.1.1.1) traps, run the following command:
esxcli system snmp set --notraps 1.3.6.1.4.1.6876.4.1.1.0,1.3.6.1.4.1.6876.4.1.1.1
2 (Optional) If the ESXi SNMP agent is not enabled, run the following command:
esxcli system snmp set --enable true
The traps identified by the specified OIDs are filtered out of the output of the SNMP agent, and are not sent
to SNMP management software.
What to do next
To clear all notification filters, run the esxcli system snmp set --notraps reset command.
vSphere Monitoring and Performance
158 VMware, Inc.