6.5.1

Table Of Contents
12 Select the storage size for the new vCenter Server Appliance, and click Next.
Storage
Size
Option
Description for
Tiny Deployment
Size
Description for
Small Deployment
Size
Description for
Medium
Deployment Size
Description for
Large Deployment
Size
Description for X-
Large Deployment
Size
Default Deploys an
appliance with 250
GB of storage.
Deploys an
appliance with 290
GB of storage.
Deploys an
appliance with 425
GB of storage.
Deploys an
appliance with 640
GB of storage.
Deploys an
appliance with 980
GB of storage.
Large Deploys an
appliance with 775
GB of storage.
Deploys an
appliance with 820
GB of storage.
Deploys an
appliance with 925
GB of storage.
Deploys an
appliance with 990
GB of storage.
Deploys an
appliance with 1030
GB of storage.
X-Large Deploys an
appliance with 1650
GB of storage.
Deploys an
appliance with 1700
GB of storage.
Deploys an
appliance with 1805
GB of storage.
Deploys an
appliance with 1870
GB of storage.
Deploys an
appliance with 1910
GB of storage.
13 From the list of available datastores, select the location where all the virtual machine configuration
files and virtual disks will be stored and, optionally, enable thin provisioning by selecting Enable Thin
Disk Mode.
14 Configure the temporary network for communication between the source vCenter Server and the
target vCenter Server Appliance, and click Next.
Option Action
Choose a
network
Select the network to which to connect the new appliance temporarily.
The networks displayed in the drop-down menu depend on the network settings of the target server. If you
are deploying the appliance directly on an ESXi host, non-ephemeral distributed virtual port groups are
unsupported and are not displayed in the drop-down menu.
Important If you want to assign a temporary IPv4 address with DHCP allocation, you must select a network
that is associated with a port group which accepts MAC address changes.
IP Address
family
Select the version for the temporary IP address of the new appliance.
Can be either IPv4 or IPv6.
Network type Select the allocation method for the temporary IP address of the appliance.
n
Static
The wizard prompts you to enter the temporary IP address and network settings.
n
DHCP
A DHCP server is used to allocate the temporary IP address. Select this option only if a DHCP server is
available in your environment.
15 On the Ready to complete stage 1 page, review the deployment settings for the target
vCenter Server Appliance and click Finish to start the OVA deployment process.
16 Wait for the OVA deployment to finish, and click Continue to proceed with stage 2 of the deployment
process to set up and start the services of the newly deployed appliance.
Note If you exit the wizard by clicking Close, you must log in to the vCenter Server Appliance
Management Interface to set up and start the services.
vSphere Upgrade
VMware, Inc. 204