6.5
Table Of Contents
- VMware vSphere Replication Installation and Configuration
- Contents
- vSphere Replication Installation and Configuration
- Updated Information
- Overview of VMware vSphere Replication
- vSphere Replication System Requirements
- Installing and Uninstalling vSphere Replication
- Install vSphere Replication
- Uninstall vSphere Replication
- Unregister vSphere Replication from vCenter Server if the Appliance Was Deleted
- Configuring the Customer Experience Improvement Program
- Isolating the Network Traffic of vSphere Replication
- Set Up a VMkernel Adapter for vSphere Replication Traffic on a Source Host
- Set Up a VMkernel Adapter for vSphere Replication Traffic on a Target Host
- Create a VM Network Adapter to Use for Incoming Replication Traffic on the Combined vSphere Replication Appliance
- Create VM Network Adapters to Isolate the Network Traffic of a vSphere Replication Server
- Deploying Additional vSphere Replication Servers
- Upgrading vSphere Replication
- Reconfigure the vSphere Replication Appliance
- Reconfigure General vSphere Replication Settings
- Change the SSL Certificate of the vSphere Replication Appliance
- Change the Password of the vSphere Replication Appliance
- Change Keystore and Truststore Passwords of the vSphere Replication Appliance
- Configure vSphere Replication Network Settings
- Configure vSphere Replication System Settings
- Update the NTP Server Configuration
- Reconfigure vSphere Replication to Use an External Database
- Use the Embedded vSphere Replication Database
- vSphere Replication Roles and Permissions
vSphere Replication System
Requirements 3
The environment in which you run the vSphere Replication virtual appliance must meet certain hardware
requirements.
vSphere Replication is distributed as a 64-bit virtual appliance packaged in the .ovf format. It is
configured to use a dual core CPU, a 16 GB and a 2 GB hard disk, and 4 GB of RAM. Additional
vSphere Replication servers require 716 MB of RAM.
You must deploy the virtual appliance in a vCenter Server environment by using the OVF deployment
wizard on an ESXi host.
vSphere Replication consumes negligible CPU and memory on the source host ESXi and on the guest
OS of the replicated virtual machine.
Note vSphere Replication can be deployed with either IPv4 or IPv6 address. Mixing IP addresses, for
example having a single appliance with an IPv4 and an IPv6 address, is not supported. To register as an
extension, vSphere Replication relies on the VirtualCenter.FQDN property of the vCenter Server. When
an IPv6 address is used for vSphere Replication, the VirtualCenter.FQDN property must be set to a
fully qualified domain name that can be resolved to an IPv6 address or to a literal address. When
operating with an IPv6 address, vSphere Replication requires that all components in the environment,
such as vCenter Server and ESXi hosts are accessible using the IPv6 address.
This chapter includes the following topics:
n
vSphere Replication Licensing
n
vSphere Replication Network Ports
n
Operational Limits of vSphere Replication
n
Compatibility of vSphere Replication with Other vSphere Features
n
vSphere Replication Compatibility with Other Software
n
Bandwidth Requirements for vSphere Replication
vSphere Replication Licensing
You can use vSphere Replication with certain editions of vSphere that include vSphere Replication in the
license.
VMware, Inc.
14