5.8
Table Of Contents
- VMware vSphere Replication Administration
- Contents
- vSphere Replication Administration
- Updated Information
- Overview of VMware vSphere Replication
- vSphere Replication Roles and Permissions
- vSphere Replication System Requirements
- Installing vSphere Replication
- Deploying Additional vSphere Replication Servers
- Upgrading vSphere Replication
- Reconfigure the vSphere Replication Appliance
- Reconfigure General vSphere Replication Settings
- Change the SSL Certificate of the vSphere Replication Appliance
- Change the Password of the vSphere Replication Appliance
- Change Keystore and Truststore Passwords of the vSphere Replication Appliance
- Configure vSphere Replication Network Settings
- Configure vSphere Replication System Settings
- Reconfigure vSphere Replication to Use an External Database
- Use the Embedded vSphere Replication Database
- Replicating Virtual Machines
- How the Recovery Point Objective Affects Replication Scheduling
- Replicating a Virtual Machine and Enabling Multiple Point in Time Instances
- Using vSphere Replication with Virtual SAN Storage
- Replicating Virtual Machines Using Replication Seeds
- Replicating a Virtual Machine in a Single vCenter Server Instance
- Configure Replication for a Single Virtual Machine to vCenter Server
- Configure Replication for Multiple Virtual Machines to vCenter Server
- Move a Virtual Machine to a New vSphere Replication Server
- Stop Replicating a Virtual Machine
- Reconfiguring Replications
- Reconfigure Recovery Point Objectives (RPO) in Replications
- Resize the Virtual Machine Disk Files of a Replication that Uses Replication Seeds
- Resize Virtual Machine Disk Files of a Replication that Does Not Use Replication Seeds
- Change the Target Datastore Location
- Change the Point in Time Settings of a Replication
- Performing a Recovery with vSphere Replication
- Monitoring and Managing Replications in vSphere Replication
- Troubleshooting vSphere Replication
- vSphere Replication Limitations
- Access the vSphere Replication Logs
- vSphere Replication Events and Alarms
- Solutions for Common vSphere Replication Problems
- Error at vService Bindings When Deploying the vSphere Replication Appliance
- OVF Package is Invalid and Cannot be Deployed
- Connection Errors Between vSphere Replication and SQL Server Cannot be Resolved
- Application Quiescing Changes to File System Quiescing During vMotion to an Older Host
- Configuring Replication Fails for Virtual Machines with Two Disks on Different Datastores
- vSphere Replication Service Fails with Unresolved Host Error
- Scalability Problems when Replicating Many Virtual Machines with a Short RPO to a Shared VMFS Datastore on ESXi Server 5.0
- vSphere Replication Sites Appear in the Not Authenticated State
- Error Recovering Virtual Machine in a Single vCenter Server Instance
- vSphere Replication RPO Violations
- vSphere Replication Appliance Extension Cannot Be Deleted
- vSphere Replication Does Not Start After Moving the Host
- Unexpected vSphere Replication Failure Results in a Generic Error
- Increase the Memory of the vSphere Replication Server for Large Deployments
- Reconnecting Sites Fails If One Of the vCenter Servers Has Changed Its IP Address
- Uploading a Valid Certificate to vSphere Replication Results in a Warning
- vSphere Replication Server Registration Takes Several Minutes
- Generating Support Bundles Disrupts vSphere Replication Recovery
- vSphere Replication Operations Take a Long Time to Complete
- vSphere Replication Does Not Display Incoming Replications When the Source Site is Inaccessible
- vSphere Replication is Inaccessible After Changing vCenter Server Certificate
- vSphere Replication Cannot Establish a Connection to the Hosts
- Anti-virus Agent in Firewall Terminates Virtual Machine Replication
- Initial Full Synchronization of Virtual Machine Files to VMware Virtual SAN Storage Is Slow
- vSphere Web Client 5.1.x Non-Functioning Option Binds vSphere Replication Traffic to a Specific vmknic
- Configuring Replication Fails After Rebuilding VRMS
- vSphere Replication Operations Run Slowly as the Number of Replications Increases
- Error at Reconfiguring the vSphere Replication Management Server from the Virtual Appliance Management Interface
n
If you use your own certificate authority, for example one that you create and manage with the
OpenSSL tools, you must add the fully qualified domain name or IP address to the OpenSSL
configuration file.
n
If the fully qualified domain name of the appliance is VR1.example.com, add subjectAltName =
DNS: VR1.example.com to the OpenSSL configuration file.
n
If you use the IP address of the appliance, add subjectAltName = IP: vr-appliance-ip-
address to the OpenSSL configuration file.
n
vSphere Replication requires a trust chain to a well-known root certificate authority.
vSphere Replication trusts all the certificate authorities that the Java Virtual Machine trusts. Also, you
can manually import additional trusted CA certificates in /opt/vmware/hms/security/hms-
truststore.jks on the vSphere Replication appliance.
n
vSphere Replication accepts MD5 and SHA1 signatures, but VMware recommends that you use
SHA256 signatures.
n
vSphere Replication does not accept RSA or DSA certificates with 512-bit keys. vSphere Replication
requires at least 1024-bit keys. VMware recommends using 2048-bit public keys. vSphere Replication
shows a warning if you use a 1024-bit key.
Change the Password of the vSphere Replication
Appliance
You set the password of the vSphere Replication appliance when you deploy the appliance. You can
change the password after installation by using the virtual appliance management interface (VAMI).
Prerequisites
n
Verify that the vSphere Replication appliance is powered on.
n
You must have administrator privileges to configure the vSphere Replication appliance.
n
You updated vCenter Server to the corresponding 5.5.x update release.
Procedure
1 Use a supported browser to log in to the vSphere Replication VAMI.
The URL for the VAMI is https://vr-appliance-address:5480.
2 Type the root user name and password for the appliance.
You configured the root password during the OVF deployment of the vSphere Replication appliance.
3 Click the VR tab and click Security.
4 Type the current password in the Current Password text box.
5 Type the new password in the New Password and the Confirm New Password text boxes.
The password must be a minimum of eight characters. vSphere Replication does not support blank
passwords.
VMware vSphere Replication Administration
VMware, Inc. 43