User guide

Technical white paper | HP Enterprise Virtual Array Storage and VMware vSphere 4.x and 5.x configuration best practices
70
4. Select PCI Device and then click on Next, as shown in Figure E-11.
Figure E-11. Selecting PCI Device as the type of device to be added to the VM
5. From the list of VMDirectPath devices, select the desired device to assign to the VM, as shown in Figure E-12.
In the example, select Port 1 of HBA3 (that is, device 21:00.0).
For more information on selecting devices, refer to Caveats.
Figure E-12. Selecting VMDirectPath devices to be added to the VM
6. Repeat Step 5 to assign Port 2 of HBA2 (that is, device 21:00.1) to the VM.
7. Use vSphere Client to open a console window to the Windows Server 2008 VM.
8. Use Device Manager on the VM to verify that the Emulex HBA has been assigned to this VM.
If zoning has already been implemented (see Fibre Channel configuration), you can now follow the HP Command View EVA
installation guide to install Command View EVA, as you would on a bare-metal (physical) server.