User guide

Technical white paper | HP Enterprise Virtual Array Storage and VMware vSphere 4.x and 5.x configuration best practices
66
Figure E-4. Indicating that, in this case, the server hardware is incompatible and that VMDirectPath cannot be enabled
3. If your server has compatible hardware, click on the Configure Passthrough… link to move to the Mark devices for
passthrough page, as shown in Figure E-5. Review the device icons:
– Green: Indicates that the device is passthrough-capable but not currently running in passthrough mode
– Orange arrow: Indicates that the state of the device has changed and that the server needs to be rebooted for the
change to take effect
Figure E-5. Allowing you to select VMDirectPath on the desired device(s)