User guide

Technical white paper | HP Enterprise Virtual Array Storage and VMware vSphere 4.x and 5.x configuration best practices
60
Moving the chosen Vdisk from one controller to the other
To better balance throughput in this example, Vdisk5 is being moved to Controller 2.
This move is accomplished by using Command View EVA to change the managing controller for Vdisk5, as shown in Figure
C-7.
Figure C-7. Using Command View EVA to change the managing controller for Vdisk5 from Controller A to Controller B
After a rescan or vCenter refresh, you can verify that the change has been implemented, as shown in Figure C-8.
Figure C-8. Confirming that ownership has changed
I/O is now round robin on FP1 and FP2 of Controller B.