5.1

17 In Options, select the required options.
Option Description
Enable Proxy ARP
Supports overlapping network forwarding between different interfaces.
Send ICMP Redirect
Conveys routing information to hosts.
18 Type the fence parameters and click Add.
19 Repeat Step 8 through Step 18 to add additional interfaces.
Change Interface Settings
You can change the port group or virtual wire to which an interface is connected, and update the IP address
of the interface.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Edge tab.
4 Double-click a vShield Edge.
5 Click the Configure tab.
6 Click Interfaces.
7
Click the Edit ( ) icon.
8 Make the required changes.
9 Click Save.
Delete an Interface
You can delete a vShield Edge interface.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge.
6 Click the Configure tab.
7 Click the Interfaces link
8 Select the interface to delete.
9
Click the Delete ( ) icon
Chapter 9 vShield Edge Management
VMware, Inc. 65