6.2

3 Select a PXE workflow from the Provisioning Workflow drop-down menu.
n
Select PhysicalSccmPxeProvisioningWorkflow to boot from an NBP then pass the machine to
an SCCM task sequence. SCCM provisioning with PXE requires custom properties to
successfully provision.
n
Select PhysicalPxeProvisioningWorkflow to boot from an NBP and then provision by any other
method.
4 If you are provisioning Cisco UCS Manager machines, select a template from the Service profile
template drop-down menu.
5 (Optional) If you are provisioning Cisco UCS Manager machines, select a boot policy to apply on
reboot from the Boot policy on reboot drop-down menu.
Your blueprint is not finished. Do not navigate away from this page.
Configure PXE Machine Resources
Machine resource settings control the resources consumed by a machine provisioned with your blueprint.
Prerequisites
Specify PXE Build Information.
Procedure
1 Specify CPU settings for provisioned machines.
a Enter the minimum number of CPUs in the Minimum text box.
b (Optional) Enter the maximum number of CPUs in the Maximum text box.
c Select an option from the Resource Matching drop-down menu to restrict provisioning to
machines with At Least as many CPUs as your blueprint minimum or Exactly as many CPUs as
your blueprint minimum.
2 Specify memory settings for provisioned machines.
a Enter the minimum amount of memory in the Minimum text box.
b (Optional) Enter the maximum amount of memory in the Maximum text box.
c Select an option from the Resource Matching drop-down menu to restrict provisioning to
machines with At Least as much memory as your blueprint minimum or Exactly as much
memory as your blueprint minimum.
IaaS Configuration for Physical Machines
VMware, Inc. 78