7.2

Post-Upgrade Tasks for Upgrading
vRealize Automation 6.2.4 or 6.2.5 8
After you upgrade vRealize Automation 6.2.4 or 6.2.5, perform any required post-upgrade tasks.
This chapter includes the following topics:
n
“Port Conguration for High-Availability Deployments,” on page 51
n
“Enabling the Connect to Remote Console Action for Consumers,” on page 51
n
“Restore External Workow Timeout Files,” on page 51
n
“Verify That vRealize Orchestrator Service Is Available,” on page 52
n
“Restore Embedded vRealize Orchestrator Endpoint,” on page 52
n
“Restore Changes to Logging in the app.cong File,” on page 53
Port Configuration for High-Availability Deployments
After nishing an upgrade in a high-availability deployment, you must congure the load balancer to pass
trac on port 8444 to the vRealize Automation appliance to support remote console features.
For more information, see the vRealize Automation Load Balancing Conguration Guide in the vRealize
Automation information center.
Enabling the Connect to Remote Console Action for Consumers
The remote console action for consumers is supported for appliances provisioned by vSphere in
vRealize Automation.
Edit the blueprint after you have upgraded the release and select the Connect to Remote Console action on
the Action tab.
For more information, see Knowledge Base article 2109706.
Restore External Workflow Timeout Files
You must recongure the vRealize Automation external workow timeout les because the upgrade process
overwrites xmldb les.
Procedure
1 Open the external workow conguration (xmldb) les on your system from the following directory.
\VMware\vCAC\Server\ExternalWorkflows\xmldb\.
2 Replace the xmldb les with the les that you backed up before migration. If you do not have backup
les, recongure the external workow timeout seings.
VMware, Inc.
51