7.3

9 Click Services.
All services must be running before you can install a license or log in to the console. They usually
start in about 10 minutes.
Note You can also log in to the appliance and run tail -f /var/log/vcac/catalina.out to
monitor service startup.
10 Enter your license information.
a Click vRA Settings > Licensing.
b Click Licensing.
c Enter a valid vRealize Automation license key that you downloaded when you downloaded the
installation files, and click Submit Key.
Note If you experience a connection error, you might have a problem with the load balancer. Check
network connectivity to the load balancer.
11 Select whether to enable vRealize Code Stream.
vRealize Code Stream is not supported for high-availability or production vRealize Automation
deployments, and requires the vRealize Code Stream Management Pack. See Licensing vRealize
Code Stream.
12 Click Messaging. The configuration settings and status of messaging for your appliance is displayed.
Do not change these settings.
13 Click the Telemetry tab to choose whether to join the VMware Customer Experience Improvement
Program (CEIP).
Details regarding the data collected through CEIP and the purposes for which it is used by VMware
are set forth at the Trust & Assurance Center at http://www.vmware.com/trustvmware/ceip.html.
n
Select Join the VMware Customer Experience Improvement Program to participate in the
program.
n
Deselect Join the VMware Customer Experience Improvement Program to not participate in
the program.
14 Click Save Settings.
Installing vRealize Automation
VMware, Inc. 67