7.2

11 Select Website on the IaaS Server Custom Install page.
12 Select a Web site from available Web sites or accept the default Web site on the Administration &
Model Manager Web Site tab.
13 Type an available port number in the Port number text box, or accept the default port 443.
14 Click Test Binding to conrm that the port number is available for use.
15 Select the certicate for this component.
a If you imported a certicate after you began the installation, click Refresh to update the list.
b Select the certicate to use from Available .
c If you imported a certicate that does not have a friendly name and it does not appear in the list,
deselect Display  using friendly names and click Refresh.
If you are installing in an environment that does not use load balancers, you can select Generate a Self-
Signed  instead of selecting a certicate. If you are installing additional Web site components
behind a load balancer, do not generate self-signed certicates. Import the certicate from the main IaaS
Web server to ensure that you use the same certicate on all servers behind the load balancer.
16 (Optional) Click View , view the certicate, and click OK to close the information window.
17 (Optional) Select Suppress  mismatch to suppress certicate errors. The installation ignores
certicate name mismatch errors as well as any remote certicate-revocation list match errors.
This is a less secure option.
18 In the IaaS Server text box, identify the rst IaaS Web server component.
Option Description
With a load balancer
Enter the fully qualied domain name and port number of the load
balancer for the IaaS Web server component, web-load-
balancer.mycompany.com:443.
Do not enter IP addresses.
Without a load balancer
Enter the fully qualied domain name and port number of the machine
where you installed the IaaS rst Web server component,
web.mycompany.com:443.
Do not enter IP addresses.
The default port is 443.
19 Click Test to verify the server connection.
20 Click Next.
21 Complete the Prerequisite Check.
Option Description
No errors
Click Next.
Noncritical errors
Click Bypass.
Critical errors
Bypassing critical errors causes the installation to fail. If warnings appear,
select the warning in the left pane and follow the instructions on the right.
Address all critical errors and click Check Again to verify.
22 On the Server and Account Seings page, in the Server Installation Information text boxes, enter the
user name and password of the service account user that has administrative privileges on the current
installation server.
The service account user must be one domain account that has privileges on each distributed IaaS
server. Do not use local system accounts.
Installing vRealize Automation
86 VMware, Inc.