7.2

Procedure
1 Select an option from the Time Sync Mode menu.
Option Action
Use Time Server
Select Use Time Server from the Time Sync Mode menu to use Network
Time Protocol . For each time server that you are using, enter the IP
address or the host name in the Time Server text box.
Use Host Time
Select Use Host Time from the Time Sync Mode menu to use
VMware Tools time synchronization. You must congure the connections
to Network Time Protocol servers before you can use VMware Tools time
synchronization.
2 Click Change Time .
3 Click Next.
What to do next
Verify that your IaaS servers are congured correctly.
Run the Prerequisite Checker
Run the Prerequisite Checker to verify that the Windows servers for IaaS components are correctly
congured.
Procedure
1 Click Run on the Prerequisite Checker screen.
As the checks are done, each Windows server for IaaS components is listed with a status.
2 If you see a warning, you can get more information on the error or choose to automatically correct the
error.
u
Click Show Details for more information on the error and the course of action to follow to address
it.
u
Click Fix to automatically x the error.
The Fix option applies corrections and restarts all IaaS machines, including those that might not
have had xes.
3 Click Run to verify corrections.
4 Click Next when all errors are resolved.
Your Windows servers are correctly congured for installation of IaaS components.
What to do next
Continue to the vRealize Automation Host screen.
Chapter 3 Installing vRealize Automation with the Installation Wizard
VMware, Inc. 45