7.1

Table 2‑24. Custom Properties to Make Software Jobs Available
Custom Property Description
LoadSoftware
Set to True to enable software install options.
Vrm.Software.IdNNNN
Species a software job or policy to be applied to all
machines provisioned from the blueprint. Set the value to
job_type=job_path, where job_type is the numeral that
represents the BMC BladeLogic job type and job_path is
the location of the job in BMC BladeLogic, for example
4=/Utility/putty. NNNN is a number from 1000 to 1999.
The rst property must start with 1000 and increment in
numerical order for each additional property.
1 — AuditJob
2 — BatchJob
3 — ComplianceJob
4 — DeployJob
5 — FileDeployJob
6 — NSHScriptJob
7 — PatchAnalysisJob
8 — SnapshotJob
Optional Custom Properties for BMC BladeLogic Configuration Manager
Integrations
You can also use optional custom properties that are commonly used with BMC BladeLogic Conguration
Manager blueprints.
Table 2‑25. Optional Custom Properties for BMC BladeLogic Configuration Manager Integrations
Property Definition
BMC.AddServer.Delay
Species the number of seconds to wait before adding the
machine to BMC BladeLogic Conguration Manager. The
default is 30.
BMC.AddServer.Retry
Species the number of seconds to wait before retrying if
the rst aempt to add the machine to BMC BladeLogic
Conguration Manager is unsuccessful. The default is 100.
Custom Properties for HP Server Automation Integration
vRealize Automation includes custom properties that you can use to provide additional controls for HP
Server Automation integration. Some custom properties are required for HP Server Automation integration.
Other custom properties are optional.
Required Custom Properties for HP Server Automation Integration
Certain custom properties are required for a blueprint to work with HP Server Automation.
Custom Properties Reference
46 VMware, Inc.