7.1

n
Custom Properties for WIM Blueprints on page 30
vRealize Automation includes custom properties that provide additional controls for WIM blueprints.
n
Custom Properties for vCloud Air and vCloud Director Blueprints on page 32
You can add certain custom properties to a vCloud Air or vCloud Director machine component
denition in a blueprint.
n
Custom Properties for Networking on page 35
The vRealize Automation custom properties for networking specify conguration for a specic
network device on a machine.
n
Custom Properties for PXE Provisioning on page 40
PXE is the only provisioning method supported for Cisco UCS Manager. You can use the network
bootstrap program with vRealize Automation custom properties to initiate WIM, SCCM, or Linux
Kickstart provisioning. You can also use custom properties to call your own PowerShell scripts. Linux
Kickstart provisioning does not require custom properties.
n
Custom Properties for vRealize Automation Guest Agent on page 42
If you have installed the vRealize Automation guest agent in your templates for cloning or in your
WinPE, you can use custom properties to run custom scripts within the guest operating system of a
provisioned machine after the machine is fully deployed.
n
Custom Properties for BMC BladeLogic Conguration Manager Integration on page 44
vRealize Automation includes custom properties that you can use to provide additional controls for
BMC BladeLogic Conguration Manager integration.
n
Custom Properties for HP Server Automation Integration on page 46
vRealize Automation includes custom properties that you can use to provide additional controls for
HP Server Automation integration. Some custom properties are required for HP Server Automation
integration. Other custom properties are optional.
Custom Properties Reference
14 VMware, Inc.