7.0

Table 3‑13. Custom Properties V Table (Continued)
Property Description
VDI.ActiveDirectory.Timeout
Specifies an optional timeout value to wait before
retrying Active Directory registration. The default
value is 00:00:15 (30 minutes).
VDI.ActiveDirectory.Delay
Specifies an optional delay time value in time
span format between successfully adding a
machine to Active Directory and initiation of
XenDesktop registration. The default value is
00:00:05 (5 seconds).
Vrm.DataCenter.Policy
Specifies whether provisioning must use a
compute resource associated with a particular
location, or if any location is suitable. To enable
this feature you must add data center to a
location file. Associate each compute resource
with a location.
Set to Exact (default) to provision a requested
machine on a compute resource associated with
the location specified on the blueprint. The
request fails if no reservations match the
requested location. If the property is not present,
the Exact default is used.
Set to NonExact to provision a requested
machine on a compute resource with sufficient
capacity and associated with the location
specified on the blueprint. If that compute
resource is not available, then use the next
available compute resource with sufficient
capacity without regard to location.
Custom Properties Reference
VMware, Inc. 81