6.2

Table 2‑15. Custom Properties for vApp Blueprints (Continued)
Custom Property Description
VirtualMachine.NetworkN.Name Specifies the name of the network to connect to, for example the
network device N to which a machine is attached.
By default, a network is assigned from the network paths
available on the reservation on which the machine is
provisioned.
You can ensure that a network device is connected to a specific
network by setting the value of this property to the name of a
network on an available reservation.
VirtualMachine.NetworkN custom properties are designed to
be specific to individual blueprints and machines. When a
machine is requested, network and IP address allocation is
performed before the machine is assigned to a reservation.
Because blueprints are not guaranteed to be allocated to a
specific reservation, do not use this property on a reservation.
You can add this property to a vApp (vCloud) blueprint or a vApp
(vCloud) Component blueprint.
For related information, see Custom Properties for Networking.
VCloud.Lease.Sync.TimeBufferMins
Specifies a threshold integer value for a compute resource such
that lease synchronization between vCloud Director and
vRealize Automation will only occur for vCloud Director or
vCloud Air provisioned machines that are set to expire in
vCloud Director or vCloud Air in that time period. If a conflict is
found, the lease value is synchronized to match the lease length
defined invRealize Automation. The default
VCloud.Lease.Sync.TimeBufferMins value is 720 minutes,
which is 12 hours. If VCloud.Lease.Sync.TimeBufferMins is
not present, the default value is used. For example, if the default
values are used, vRealize Automation will run the lease
synchronization check workflow every 45 minutes, which is the
workflow default, and only the leases of machines that are set to
expire within 12 hours are changed to match the lease length
defined in vRealize Automation.
Custom Properties Reference
VMware, Inc. 35