7.3
Table Of Contents
- Custom Properties Reference
- Contents
- Custom Properties Reference
- Updated Information
- Custom Properties and the Property Dictionary
- Using Custom Properties
- Custom Properties Grouped by Function
- Custom Properties for Deployments
- Custom Properties for Naming and Analyzing Deployments
- Custom Properties for OpenStack Endpoints
- Custom Properties for Clone Blueprints
- Custom Properties for Linked Clone Blueprints
- Custom Properties for FlexClone Blueprints
- Custom Properties for Basic Workflow Blueprints
- Custom Properties for Linux Kickstart Blueprints
- Custom Properties for SCCM Blueprints
- Custom Properties for WIM Blueprints
- Custom Properties for vCloud Air and vCloud Director Blueprints
- Custom Properties for Networking
- Custom Properties and Property Groups for Containers
- Custom Properties for PXE Provisioning
- Custom Properties for vRealize Automation Guest Agent
- Custom Properties for BMC BladeLogic Configuration Manager Integration
- Custom Properties for HP Server Automation Integration
- Custom Properties Grouped by Name
- Custom Properties Underscore (_)
- Custom Properties A
- Custom Properties B
- Custom Properties C
- Custom Properties E
- Custom Properties H
- Custom Properties I
- Custom Properties L
- Custom Properties M
- Custom Properties N
- Custom Properties O
- Custom Properties P
- Custom Properties R
- Custom Properties S
- Custom Properties V
- Custom Properties X
- Using the Property Dictionary
- Using Property Definitions
- Using Property Groups
- Defining Component Profile Settings
Table 1‑18. Custom Properties for Networking Configuration (Continued)
Custom Property Description
NSX.Edge.HighAvailability
When set to true (NSX.Edge.HighAvailability=true), enables
high availability (HA) mode on the NSX edge machine that is
deployed from the blueprint.
When used with
NSX.Edge.HighAvailability.PortGroup=port_group_name,
this property allows you to configure an NSX edge during
blueprint authoring.
You can add this property to an NSX load balancer component
in the vRealize Automation blueprint or to the
vRealize Automation blueprint itself.
Must be used in conjunction with
NSX.Edge.HighAvailability.PortGroup= port_group_name.
NSX.Edge.HighAvailability.PortGroup
Creates an internal interface or internal vNIC attached to the
specified port group name, for example
NSX.Edge.HighAvailability.PortGroup=VM Network where
VM Network is an HA (high availability) distributed (vLAN-
backed) or NSX logical switch port group. NSX HA mode
requires at least one internal network interface, or vNIC.
When used with NSX.Edge.HighAvailability=true, this
property allows you to configure high availability (HA) an NSX
edge during blueprint authoring.
When using one arm load balancer with HA enabled, you must
specify a separate port group for the HA.
Note The specified port group network cannot be a member of
the reservation pool, as the property's use of the port group
conflicts with the normal deployment's use of the port group,
resulting in the following error:
Portgroup must be unique within an
Edge...
Must be used in conjunction with
NSX.Edge.HighAvailability=true.
Custom Properties Reference
VMware, Inc. 40