7.0

Table 1‑12. Custom Properties for Networking Configuration (Continued)
Custom Property My Value Description
VirtualMachine.NetworkN.Name
Specifies the name of the network to
connect to, for example the network
device N to which a machine is attached.
This is equivalent to a network interface
card (NIC).
By default, a network is assigned from the
network paths available on the
reservation on which the machine is
provisioned. Also see
VirtualMachine.NetworkN.AddressTy
pe.
You can ensure that a network device is
connected to a specific network by setting
the value of this property to the name of a
network on an available reservation. For
example, If you give properties for N= 0
and 1, you get 2 NICs and their assigned
value, provided the network is selected in
the associated reservation.
VirtualMachine.NetworkN custom
properties are designed to be specific to
blueprints and machines. When a
machine is requested, network and IP
address allocation is performed before
the machine is assigned to a reservation.
Because blueprints are not guaranteed to
be allocated to a specific reservation, do
not use this property on a reservation.
You can add this property to a vCloud Air
or vCloud Director machine component in
a blueprint.
VirtualMachine.NetworkN.PortID
Specifies the port ID to use for network
device N when using a dvPort group with
a vSphere distributed switch.
VirtualMachine.NetworkN custom
properties are designed to be specific to
individual blueprints and machines. When
a machine is requested, network and IP
address allocation is performed before
the machine is assigned to a reservation.
Because blueprints are not guaranteed to
be allocated to a specific reservation, do
not use this property on a reservation.
Configuring vRealize Automation
VMware, Inc. 41