User`s guide

VMware, Inc. 67
Chapter 3 Managing and Configuring Stage Manager
6Specifywhethertouseanetworkarchitecturemodefordeployingconfigurations:
 AllowTrafficInandOut–Virtualmachinescancommunicatewithmachines
outsidethefenceandmachinesoutsidethefencecancommunicatewith
virtualmachinesinthefencedconfiguration.
 AllowTrafficOut–Virtualmachinesinafencedconfigurationcaninitiate
communicationtomachinesoutsidethefence,andcanreceivemessagesback
onthesameconnection.Machinesoutsidethefencecannotinitiate
communicationtovirtualmachinesinthefencedconfiguration.
 BlockTrafficInandOut–Networktrafficdoesnottravelacrossthefence.
Virtualmachinesinafencedconfigurationcannotcommunicatewith
machinesoutsideofthefence,andmachinesoutsidethefencecannot
communicatewithvirtualmachinesinthefencedconfiguration.
7Tobootvirtualmachinesinthesequencespecifiedduring
thecreationofthe
configuration,selecttheUseServerBootSequencecheckbox.
8Enterthedefaultvalueforthedelaytime(or“pause”)betweenbootingeach
virtualmachineinaconfiguration.
Stage Managerusesthisdefaultvaluewhentheusercreatesanewconfiguration
oraddsavirtualmachinetoanexistingconfiguration.
9Fromthelistofavailableservices,selecttheappropriateservicesandusetheright
andleftarrowstomovethemtothelistforserviceuseraccessorservice
administratorsaccess.
AlthoughStage Manageradministratorshaveaccesstoallservices,youmightstill
assignspecificrolesfortrackingpurposes.Forexample,you
canseethis
informationontheUserspage.
10 ClickOK.
ThenewuserappearsontheUserspage.
Deleting Users
Thisoperationrequiresyoutodisabletheuseryouwanttodelete.
To delete a user
1Intheleftpane,clickUsers.
2Iftheuserisenabled,movethepointerovertheusernameandchooseDisable
fromthemenu.
3MovethepointerovertheusernameandchooseDeletefromthemenu.