User`s guide

VMware Stage Manager User’s Guide
162 VMware, Inc.
7IntheVirtualMachinestab,movethepointeroverthevirtualmachinenameand
chooseDeployfromthemenu.
Whenyoudeploythevirtualmachine,anerrormessagemightappearabouta
duplicateIPaddressbecauseonlyStage ManagerisawareofthenewIPaddress.
Ifthiserrormessageappears,click
No.
8 Navigatetothevirtualmachineconsole.
9Frominsidethevirtualmachineconsole,manuallychangetheIPaddressofthe
virtualmachineasappropriateforyouroperatingsystem.
 ForWindowsmachines:
iFromthevirtualmachineconsole,opentheControlPanel.
ii NavigatetotheLocalAreaConnection(LAN)windowthroughthe
NetworkConnectionswindow.
iii ClickProperties.
iv FromtheGeneraltab,selecttheInternetProtocol(TCP/IP)checkbox
andclickProperties.
vClickUsethefollowingIPaddress,andenterthenewIP
address.
vi Closeallwindows.
 ForLinuxmachines:
iLoginasroot.
ii Usetheifconfig-acommandtoretrievetheIPaddressofthemachine
andthenameoftheEthernetCardIdentifier.
iii UsetheifconfigcommandtochangetheIPaddress:
ifconfig <interface> <new IP address> netmask <netmask>
Refertothisexample:
ifconfig eth0 10.10.10.10 netmask 255.255.0.0
Adding Virtual Hard Disks to Virtual Machines
Youcanaddoneormorevirtualharddisks(.vhd)foranundeployedvirtualmachine.
To add virtual hard disks
1Intheleftpane,clickServices.
2MovethepointerovertheservicenameandchooseDetailsfromthemenu.