2.0

Procedure
1 Click the Edit button.
2 Select the DHCP or Static IP check box.
You can select both check boxes if your environment supports both protocols.
3 If you selected Static IP, enter a valid netmask.
4 Click OK to accept the network settings.
5 Enter the FQDN for the Management Server - vCenter Network adapter.
6 Enter the FQDN for the DB Name Server - vCenter Network adapter.
7 If you selected Static IP, enter the IP address for each adapter in the address text box.
8 Click Next to continue.
Configure Network Mapping
The Network Mapping screen of the setup wizard allows you to map the vSphere networks to the type of Data
Director network traffic they will carry.
Prerequisites
n
Plan the network setup for your environment. See the vFabric Data Director Worksheets.
n
Complete the vCenter Network setup in the Data Director Setup wizard.
Procedure
1 Use the Internal Network drop-down menu to configure the network mapping.
The Internal Network traffic must be on a different network than other network traffic.
2 Use the drop-down menu for the other networks (Web Console, Internal, and DB Name Service Network)
to configure their network mapping.
During development and prototyping, you can use one network for these three types of network traffic.
In a production environment, each Data Director network must map to a different vSphere network.
3 Click Next to continue.
Data Director setup maps the networks. This can take a few minutes. When mapping finishes, Data Director
setup continues to the Network Configuration screen.
Configure Networks and Network Adapters
To allow the Management Server and DB Name Server to communicate by using the Internal and DB Name
Service Networks, you set up the network settings and configure the adapters.
Prerequisites
n
Plan the network setup for your environment. See the vFabric Data Director Administrator and User Guide.
n
Complete the Network Mapping screen of the Data Director Setup wizard.
Procedure
1 Click the Edit button.
2 Select the DHCP or Static IP check box.
You can select both check boxes if your environment supports both protocols.
Chapter 4 Set Up Data Director
VMware, Inc. 31