2.0

Figure 2-3. One VLAN Network Configuration
Data Director
Web Console
vFabric Data Director vApp
vCenter Network
Management
Server
DB Name
Server
Internal Network (DHCP or IP pool required)
Database VMs
DB Access Network (DHCP or IP pool required)
Database
Client
DB Name Service Network
Database
Client
Database
Client
Web Console Network
vCenter Network
Internal Network
(DHCP or IP Pool required)
DB Name Service Network
DB Access Networks
(DHCP or IP Pool required)
network adapter
(configured during setup)
vCenter
Server
ESXi host
Web Console
Network
vSphere Update
Manager Server
SMTP Server
Required IP Addresses and DHCP Setup
This configuration requires DHCP or IP pools on the shared (vCenter Server, Web Console, and Internal)
network and the DB Access network. To handle internal management traffic, assign at least as many IP
addresses as the number of databases to the DHCP range or the IP pool. See “Data Director Networks, IP
Allocation, and Firewalls,” on page 15.
Limitations
Because all network traffic is carried by one network, you cannot isolate databases into different networks.
You also cannot separate internal traffic from other network traffic. Use this configuration only during
development.
VMware vFabric Data Director Installation Guide
22 VMware, Inc.