2.0

When a database client or application wants to connect to a database using the
Data Director JDBC or database drivers, the driver retrieves the database IP
address from the DB Name Server using the connection string. The driver sets
up the connection between the application and the target database. When you
use the application to access the database, the application uses that connection.
This means that the DB Access Network must be visible from all database
clients.
The advantage provided by DB Name Service is that the database applications
are not affected when the database server's IP address changes. This enables
databases to use dynamic IP addresses from a DHCP server and lowers
management costs.
Data Director Networks
Data Director uses the following networks to carry different types of network traffic.
vCenter Network
Carries management traffic between vCenter Server and the Data Director
Management Server. This network carries commands that the Management
Server uses to interact with vCenter Server and all the ESXi hosts managed by
that vCenter Server.
Internal Network
Carries internal management traffic among vPostgres databases, the Data
Director Management Server, and the DB Name Server.
Web Console Network
Carries traffic between Web clients (console) and the Data Director
Management Server.
DB Name Service
Network
Carries traffic for the name service for vPostgres databases. The DB Name
Server performs database name to IP address translation (database connection
services) and must be reachable from database clients.
DB Access Networks
Data Director includes one or more DB Access Networks for carrying SQL
traffic between database clients and database virtual machines (DBVMs). Each
DB Access Network must have DHCP enabled.
Traffic for more than one Data Director network can be on the same physical network. For example, vCenter
Network traffic can share the identical vSphere network with the Web Console Network traffic.
Some possible network configurations are as follows.
n
Four separate networks, one for carrying each type of Data Director network traffic, plus one or more
networks for carrying database (SQL) network traffic to and from databases. See “Four VLAN Network
Configuration,” on page 18.
n
Two networks, one for carrying database (SQL) network traffic and one shared network that carries all
Data Director Management Server network traffic. This configuration is the minimum network
configuration. See “Two VLAN Network Configuration,” on page 20.
Database clients send and receive SQL traffic from database servers on the DB Access Network. Data Director
supports more than one database network VLAN for better network isolation, for example, to isolate QA SQL
traffic from production traffic.
If you set up two separate database networks, the database network traffic can use the vCenter Network, Web
Console Network, or DB Name Server Network.
You can have as many database networks as your site requires. However, database clients must have access
to the DB Name Service Network.
VMware vFabric Data Director Installation Guide
14 VMware, Inc.