1.0
Table Of Contents
- VMware vFabric Data Director Administrator and User Guide
- Contents
- About VMware vFabric Data Director
- Updated Information
- VMware vFabric Data Director and vFabric Postgres Overview
- Managing Data Director Resources
- Managing Users and Roles
- Managing Organizations
- Managing Database Groups
- Managing Database Templates
- Managing Databases
- Cloning Databases
- Managing Database Entities
- Safeguarding Data
- Monitoring the Data Director Environment
- Managing Licenses
- Reconfiguring Data Director Networks
- Change the vCenter IP Address
- Reconfigure the Web Console Network Mapping or Network Adapter
- Reconfigure the vCenter Network Mapping
- Reconfigure the vCenter Network Adapter Settings
- Reconfigure the DB Name Service Network or DB Name Service Network Adapter
- Reconfigure the Internal Network or Internal Network Adapter Mapping
- Verify Network Settings in Data Director
- Data Director Troubleshooting
- Index
4 In the Network Adapters section, edit the network adapter text boxes, and click Next.
5 Click Next again.
6 Click Finish to confirm and save the changes.
The changes take effect immediately.
7 Verify the IP address change in the vSphere Client.
a Log in to vSphere Client as an administrator.
b Select the Management Server virtual machine.
c Click the Summary tab, and examine the IP Addresses line.
d Click View all to check all IP addresses.
Reconfigure the DB Name Service Network or DB Name Service
Network Adapter
During installation, you configure the DB Name Service Network and the DB Name Service Network Adapter.
You can later reconfigure the DB Name Service Network or the DB Name Service Network Adapter by editing
the settings in the Data Director UI.
Prerequisites
Review the information about network settings in Data Director in the vFabric Data Director Installation Guide.
Procedure
1 Log in to Data Director as a system administrator, click the System tab, and select Administration.
2 Click the Network Setup tab, and click Edit Network Setup.
3 Click Next to skip vCenter Network setup.
4 To reconfigure the DB Name Service Network mapping, select the appropriate network mapping in the
DB Name Service Network drop-down menu, and click Next.
5 (Optional) Click Finish if you are not reconfiguring the DB Name Service Network Adapter or modify
the adapter.
a To enable or disable DHCP or Static IP addressing, click Edit next to the network name.
b Toggle the DHCP check box to enable or disable DHCP.
c Toggle the Static IP check box to enable or disable static IP, and enter the netmask in the Netmask
text box if Static IP is enabled.
d Click OK.
e In the DB Name Server - DB Name Service Network Adapter section, select DHCP or Static IP.
If you select Static IP, enter the IP address and FQDN.
6 Click Finish to commit your changes.
VMware vFabric Data Director Administrator and User Guide
112 VMware, Inc.