System information

20 Dialogic
®
HMP Software Release 3.0WIN Release Guide — December 2010
Dialogic Corporation
System Requirements
Note: Dialogic
®
HMP Software Release 3.0WIN has been tested only on systems with NT file
systems (NTFS). Dialogic
®
Host Media Processing Software Release 3.0WIN has not
been tested on systems with FAT 32.
2.4 Ordering the Product
The following table lists the resources that are available through flexible licensing.
Table 4. Media and Other Resources
Resource
Resource
Code
Number of
Resources
Available
Resource Description
RTP G.711 r 0-500 Provides the capability of streaming digitized voice
over RTP using the G.711 coder with 10, 20, 30 ms
frames. The number of RTP resources for any given
configuration should be greater than or equal to the
number of voice, enhanced voice, conferencing,
continuous speech processing, or fax resources
(whichever requires the highest number of
resources).
Voice v 0-500 Basic voice ports that allow you to control volume,
record with Automatic Gain Control (AGC), and
DTMF and user-defined tone detection, including
RFC 2833 and H.245 UII. Each voice port requires
an RTP G.711 port.
Enhanced RTP e 0-200 Adds the capability of streaming voice over RTP
using the G.723.1, G.729a, and G.729b coders.
Conferencing c 0-500 Conferences parties using advanced features such
as coach/pupil mode, tone clamping, and active
talker notification. Conferencing resources require
RTP G.711.
Speech Integration
(Continuous Speech
Processing)
s 0-240 Speech integration capabilities that enable you to
integrate the HMP Software product with speech
engines for Automatic Speech Recognition (ASR)
and Text-To-Speech (TTS) support using the
Dialogic
®
Continuous Speech Processing APIs.
Fax Termination f 0-120 Supports T.38 and V.17 fax origination and
termination sessions. Fax requires RTP G.711.
IP Call Control i 0-2000 Supports first party and third party IP call control.
First party call control manages a media session that
is initiated and terminated by Dialogic
®
HMP
Software. Third party call control enables one entity
to create, modify, or terminate a media session
between two or more endpoints where the call
control signaling and media exchange are
independently managed.
Multimedia m 0-120 Supports play, record, and synchronization of voice
and H.263 format video in a multimedia stream.
Includes video I-frame detection to trigger start of
record as well as transmit-oftone notification when
recording begins. Multimedia requires RTP G.711